EN
QSR SERIES
USER MANUAL - REV000A
6
QSR series
4 - Safety
5 - Installation
QSR
Series
• To avoid cavitation in the propeller, the tunnel must be positioned as low as possible.
• In order to prevent any damage, position the retractable thruster in such a way that the closing lid is not affected by the
propulsion cone of the boat propeller (example 1 and 2), in both directions.
minimum 0,75
times Ø tunnel
1
2
5.0 - Installation requirements
4.0 - Warnings
• QS Seamaster
®
thrusters have been designed and manufactured for nautical use.
• Do not use these appliances for other uses.
• QS Seamaster
®
shall accept no responsibility for direct or indirect damages caused by improper use of the appli-
ance or an improper installation.
• The thruster is not designed for maintaining loads generated in particular atmospheric conditions (storms).
•
It is strongly recommended to entrust a professional with the preparation and positioning of the counter flange on
the hull. These instructions are generic and do not show by any means the details of the operations of presetting the
counter flange, which falls under the competence of the shipyard. In case of problems caused by a defective installa
-
tion of the tunnel, the installer will be held responsible.
•
Do not install the electric motor near easily inflammable objects
.
Summary of Contents for QSR Series
Page 2: ......
