EN
QSR SERIES
USER MANUAL - REV000A
19
QSR series
7 - Operation
7.1 - Actuator current rotary switch
The ten selectable steps (from 0 to 9) allow you to set a percentage
(see table) regarding the maximum current/load allowed for the actuator
in use.
ROTARY SWITCH
POSITION
0
1
2
3
4
5
6
7
8
9
MAXIMUM CURRENT
LOAD %
28%
36%
44%
52%
60%
68%
76%
84%
92%
100%
Should a setting different to the factory one be requested, carry out the following operations:
1) Turn the arrow of the rotary switch to the desired position with the board not powered.
2) When the board is powered, the percentage corresponding to the selected position will automatically be set.
If the maximum current/load is too low compared to the real operating requirements, protections against high absorption of
the actuator may intervene in closing and opening the retractable, with flashing 1 and 7 errors.
8.0 - QSRGTW Adapter signalling
LED STATUS
DESCRIPTION
OFF
QSRGTW adapter not powered or an error has occurred
SHORT FLASHING
QSRGTW adapter powered and QAJ control not enabled
RHYTHMICAL FLASHING
Retractable propeller (if fitted) is moving
FAST FLASHING
Protection against prolonged motor activity
ON WITH SHORT SWITCHING OFF
Low supply voltage
ON
QAJ control enabled
LED POWER (GREEN)
LED ERROR (RED)
FLASHING
NUMBERS PROBLEM
DESCRIPTION
1
High absorption on motor
reversing contactor unit
control’s output.
The problem is signaled in case the QSRGTW adapter detects a
short-circuit or an overcharge on the electric line between the
QSRGTW and the RTC R1.
Check the wiring of the electric lines of QSRGTW adapter to RTC
R1.
2
Interrupted connection on
the motor reversing contac-
tor unit control’s output.
The problem is signaled in case the QSRGTW adapter detects an
interruption on the electric line between QSRGTW and RTC R1.
Check the wiring of the electric lines of QSRGTW adapter to RTC
R1.
3
Problem present on the
QSR* propeller.
The control system of the QSR propeller has detected a problem.
Refer to the QSR use and maintenance manual.
QSRGTW ADAPTER
GREEN
LED
RED
LED
8 - Notification
QSR Series
Here below the meaning of the flash signaling supplied by the QSRGTW adapter:
7 - Operation
Summary of Contents for QSR Series
Page 2: ......
