EN
QSR SERIES
USER MANUAL - REV000A
11
QSR series
5 - Installation
• Temporarily fasten the hinge bracket in its position.
•
Screw the hinge onto the angle bracket with the central screw only (fig. 11).
• Position the hinge and hinge bracket in the correct positions.
Mark all the fastening points (fig. 12), remove the hinge and hinge bracket and drill
using the Ø 8,5 mm bit.
•
Fasten the hinge and hinge bracket in the positions marked with stainless steel
hardware suitable for the application.
•
Adjust the central screw of the hinge (fig. 11) and position it correctly so that the
hatch can open without any hindrance.
CENTRAL SCREW
Fig. 11
Fig. 12
QSR Ø250
15 mm
20 mm
LID
LID
Min. 80 mm
Min. 90 mm
COUNTER FLANGE
COUNTER FLANGE
HINGE
HINGE
ANGLE BRACKET
HULL
HULL
HULL
HULL
• Drill the angle bracket and fasten securely also
the other two M8 screws (fig. 13).
Fig. 13
WARNING:
in order to allow a stable fixing of hinge and
bracket, the lid must present neither empty areas nor non-
structural fillings inside (fig. 12).
Min. 5 mm
Min. 5 mm
Hull Max 50 mm
Hull Max 35 mm
QSR Ø185
N 2 SCREWS M8
ANGLE BRACKET
Summary of Contents for QSR Series
Page 2: ......
