QRPworks Key Log Go User Manual Download Page 4

Page: 4 / 58

Key Log Go rev 2.6 Page 4 of 58

Overview

Thank you for your purchase of the QRPworks Key Log Go

™

(KLG).

Its purpose is to enhance your portable operating experience
with a variety of rigs.

In a nutshell,



It is a keyer, containing the powerful and popular K1EL

WinKeyer



It is a message generator, allowing you to send up to 20

messages you have defined, with just a keystroke.



It is a log, with the space for 1000 QSOs



It is an ADIF export tool, allowing you to export your logged

QSOs in an ADIF format.



It is portable, with a sunlight readable display and able to

operate up to 50 hours on an internal battery.



It can operate with or without a keyboard

Rig Specific Functions

Elecraft KX3/KX2/K3/K3s



If you use an Elecraft KX3, KX2, K3, or K3s the KLG will

display the scrolling rig-decoded PSK31, RTTY, or CW
text on an 80 character screen.



It will allow you to send up to 20 macros to the rig to

control just about every aspect of it.



The KLG offers the Quick QSY

™ feature, allowing you

to change frequency and mode very easily.



The log will automatically be populated with the current

frequency and mod

e, so you don’t have to enter it.

Summary of Contents for Key Log Go



























































Search results

Summary of Contents for Key Log Go

Reviews:

Related manuals for Key Log Go

Brands by name

Popular brands

QRPworks Key Log Go, User Manual

Search results

Summary of Contents for Key Log Go

Reviews:

Related manuals for Key Log Go

Brands by name

Popular brands