Key Log Go rev 2.6 Page 18 of 58
sending the message character by character, as if you were
sending CW.
If you press an F key more than once, or multiple F keys in
sequence, the messages will be sent in sequence (chained).
This is useful, for instance, if you want to send a longer CQ. If
the message stored in F1 is:
CQ CQ CQ CQ CQ DE KF0UR KF0UR KF0UR
Pressing F1 twice will result in the following message:
CQ CQ CQ CQ CQ DE KF0UR KF0UR KF0UR CQ CQ
CQ CQ CQ DE KF0UR KF0UR KF0UR
Callsign Entered
The KLG gives you the ability to capture another station’s
callsign and have it sent out automatically in messages and
automatically populate the log. You may be familiar with this
feature in most contest loggers and PSK31 or RTTY programs.
To use it,
Enter the call by pressing
Alt-C or
by tapping
CALL/ESC
. Enter up to 10 characters with the
keyboard or paddle. Backspace to make changes
(keyboard or
FN/BACKSP
)
In any of the 20 KLG messages, use the exclamation
p
oint (!) where you want the other station’s call to
appear. Use the keyboard, or Key-board
prosign AA
where you want the !.to appear.
To Erase the entire call displayed, backspace a
character at a time, or Key-board
prosign SK
To Save it, press
Enter
on the keyboard, or tap
F1/SAVE
, or Key-board
prosign KN
.
