Key Log Go rev 2.6 Page 17 of 58
-
If you want to cancel the editing of a message, press
the
ESC
key at any time. The KLG will return to the
normal mode. The LED will go out and you will see the
following message briefly:
Naming Text Messages
The KLG provides a way to name a message. The name will
then be shown in the message summary screen as a handy
reminder.
To name a message, simply enter the name as the first
characters followed by a colon “:”. Everything to the left of the
colon is the message name and is not sent to the rig.
Everything to the right of the colon will be sent to the rig as text.
It’s advised to keep the names short, as the space for the
characters used are shared with the characters used for the
message. The longer the name, the less room you will have for
the message.
Sending a Stored Text Message
To send a stored text message, just press the F or Alt-F key of
the message to be sent. The rig will be keyed and the
message will be sent as CW. The sent message in its entirety
will appear on the KLG screen at once, while the keyer is
