QRPworks Key Log Go User Manual Download Page 20

Page: 20 / 58

Key Log Go rev 2.6 Page 20 of 58

(where Msg Name is the name of the message and is
not sent)



Then when you press F2 on the keyboard or

F2/TAB

you will be prompted to

enter a call (that’s the ‘grab’

part):

Use the keyboard to type it in or use the paddle

to Key-board it in.

The call you are typing or keying

sent to the

rig and will go out on the air.

When you are finished typing the call, press

Enter on the keyboard, F2 again, or

F2/TAB

again. The rest of the message in F2 will then
follow (that’s the ‘Go’ part).



To erase a Grab & Go

™

call, either backspace until it

is gone, or Key-board

prosign SK

In summary, the Grab & Go

™

flow is:



Press the message F key or

F1/SAVE

F2/TAB

to be

sent



Type or Key-board the call (it gets sent as you enter it)



Press the message F key or

F1/SAVE

F2/TAB

again

for the rest of the message to be sent

Summary of Contents for Key Log Go



























































Search results

Summary of Contents for Key Log Go

Reviews:

Related manuals for Key Log Go

Brands by name

Popular brands

QRPworks Key Log Go, User Manual

Search results

Summary of Contents for Key Log Go

Reviews:

Related manuals for Key Log Go

Brands by name

Popular brands