Key Log Go rev 2.6 Page 16 of 58
The first 10 messages (1-10) are stored and sent using the
function keys,
F1
to
F10
. The second 10 messages (11-20)
are stored and sent using the function keys,
Alt-F1
to
Alt-F10
.
Creating or Editing a Message:
In the normal mode (Status LEDs is off), press
F12
.
The Status LED will now be Green indicating you are in
the Edit mode. The screen will prompt you to press a
key
F1
through
F10
or
Alt-F1
through
Alt-F10.
o
If no message has been stored previously, you will
see <no message yet….just start typing>
o
If a message has been previously stored, it will be
displayed. Edit or add any additional text. See the
“
Editing a Stored Text Message or Macro
” section in
this manual for a list of editing options.
o
New in version 2.3.0 and later: When using a KX3
or KX2 and in RTTY or PSK31, the rig will remain in
transmit mode for approx. 4 seconds after the last
character has been sent. To have the rig go back to
receive immediately after the last character has
been sent, add a vertical bar “|” at the end of the
message (without the quotes). It’s especially useful
when contesting.
Example: 5NN CO |
When finished, press the
F12
key again to save the
changes and return to the normal mode. The Status
LED will go out and you will see the following
sample message briefly:
