Key Log Go rev 2.6 Page 12 of 58
The Keyer Inside
The KLG can send CW to any rig that has a straight key input.
The KLG keying functions are provided by the powerful K1EL
WinKeyer, and all of its features are at your fingertips.
The WinKeyer can run into 2 modes:
Host Mode
), where the KLG is controlling its functions.
This is the typical mode that you will use. It does not
require any WinKeyer specific knowledge.
Standalone Mode
, where the WinKeyer is independent
from the KLG. This mode is typically used by WinKeyer
aficionados, who know the WinKeyer commands and how
to control them. To operate the WinKeyer in this mode, we
refer you to the WinKeyer manual.
To toggle between Host and Standalone modes, hold the
Log
and
Msg Sel
buttons simultaneously.
KLG Keyer Functions
When in the Host Mode, The KLG offers the following CW
features:
Speed Change
– use the up/down arrows on the
keyboard, or press
Alt-S
and enter a speed or use the
arrows, or simply turn the speed pot on the KLG.
Paddle Swap
– changes the paddle from dits on the left
and dahs on the right to the opposite. Press
Alt-W
to
toggle between the 2 options.
Autospace
- When autospace is enabled, the
WinKeyer will automatically insert the proper inter-letter
