Key Log Go rev 2.6 Page 29 of 58
ESC
: press
ESC
any time to go back to real time receiving.
Logging a New QSO
To log a new QSO, enter the KLG Log by pressing
Alt-L
, and
then
L
to Log a QSO, or tap
LOG
. The QSO log screen will
then be shown
The info here is shown as an example.
To navigate from field-to-field, press
TAB,
use the up or down
arrows, or tap
F2/TAB
.
To navigate within a field, use the left right arrows, home or
end, or backspace. Press
Insert
to toggle between the insert
(flashing cursor) or overtype modes (same as editing
messages and macros).
When Key-boarding, backspace by tapping
FN/BACKSP
.
Press Enter, tap
F1/SAVE
, or Key-board
prosign KN
to save
the QSO.
Call:
Enter the call worked. Maximum: 10 characters. Enter
either upper or lower case. The KLG will convert it to upper
case. This is a required field.
Exch:
Enter the exchange. Maximum 10 characters. Any
characters can be entered, so this can be used for regular
QSOs (“599”) or contest exchanges (“2A CO”, “Steve NY”).
This is not a required field.
