Qiagen 1120412 User Manual Download Page 10

Page: 10 / 122

QIAamplifier 96 User Manual 03/2020

Symbol for waste disposal in accordance with WEEE directive:

Do not dispose of in household waste

CE marking

China RoHS marking

2.2

Safety markings on the QIAamplifier 96

Damaged or missing safety symbols can cause incorrect actions leading to personal injury or
material damage.

Important

: Do not remove safety symbols. Replace damaged safety symbols immediately.

The following safety symbols are attached to the inside of the heated lid and the rear of the device:

CAUTION!

Hazard area!

Proceed with due care when handling samples and working with the
QIAamplifier 96.

CAUTION!

Risk of burns!

There is a risk of burning at the heated lid, the thermal block, the samples, and
the rear of the device.

Summary of Contents for 1120412



























































































































Search results

Summary of Contents for 1120412

Reviews:

Related manuals for 1120412

Brands by name

Popular brands

Qiagen 1120412, User Manual

Search results

Summary of Contents for 1120412

Reviews:

Related manuals for 1120412

Brands by name

Popular brands