QIAamplifier 96 User Manual 03/2020
62
As already described in chapter 8.6.1.5, a gradient step can be programmed here (see Figure
28).
Figure 27. QIAamplifier 96 gradient view.
8.7
Inserting a step
To insert a step, select a program step on the QIAamplifier 96 spreadsheet or graphical
programming screen and press
Insert
.
Insert
When you press
Insert
, the screen for editing program steps opens (see chapter 8.6). Enter the
desired parameters for the new step.
Note
: The new step will be inserted at the selected program step. If, for example, step 3 is selected,
the new step will be inserted at position 3. The existing step 3 is not overwritten; instead step 3 and
all the following steps are moved one position higher. This means the existing step 3 becomes step
4, step 4 becomes step 5 and so on.
Note
: If a new step is inserted in an existing loop, the number of steps within the loop increases,
whereas the number of cycles remains the same.
