PURSUIT 2865 DENALI, Owner'S Manual

Page: 116 / 175

2865 DENALI
SHOULD BE NOT BE USED ON TOWER LADDERS, STEERING WHEELS AND OTHER AR-
EAS WHERE A GOOD GRIP AND SURE FOOTING IS IMPORTANT.
Stains can be removed with a metal polish or fine polishing compound. To minimize
corrosion, use a caulking compound to bed hardware and fasteners mounted to aluminum
fabrications. If the anodized coating is badly scratched it can be touched up with paint. With
proper care, anodized aluminum will provide many years of service.
Notice: You should contact Pursuit Customer Relations before making any
modifications to aluminum fabrications. Unauthorized modifications can void
the warranty.
Chrome Hardware
Use a good chrome cleaner and polish on all chrome hardware.
Acrylic Plastic Glass
Acrylic plastic glass scratches easily. Never use a dry cloth or glass cleaning solutions on
acrylic glass. Use a soft cloth and mild soap and water for routine cleaning. Solvents and
products containing ammonia can permanently damage acrylic glass.
Fine scratches can be removed with a fine automotive clear coat polishing compound. A coat
of automotive or boat wax is beneficial to protect the surface. Do not use the following on
acrylic plastic glass:
Abrasive cleaners Acetone
Solvents Alcohol
Glass cleaners Cleaners containing ammonia
Simulated Wood grain Panels
The simulated wood grain instrument and switch panels are made using a special process.
Each panel is clear coated with a special exterior finish and hand buffed to obtain a rich deep
high gloss wet look. The clear coat is formulated for the marine environment, but basic
precautions and regular care are necessary to protect it.
DON'T:
•
Drill or cut any holes through the clear coat.
• Rub the finish using a lot of pressure.
• Use any solvent of any kind on the finish.
• Use rubbing compound of any kind on the finish.
• Use any cleaners with ammonia or an abrasive on the finish.
• Use any Scotchbrite
TM
type product on the finish.
• Use any powder abrasive such as Ajax
TM
or Soft Scrub
TM
on the finish.
Preventative Care:
Waxing the panels will protect against water spots. The rain water is contaminated and if the
panels are not waxed, water spots will be apparent. Before using your boat and at regular
13-4