PURSUIT 2865 DENALI, Owner'S Manual

Page: 78 / 175

2865 DENALI
The L-lounge area is also equipped with an optional pedestal mounted table. The pedestal is
secured to the deck by a special bracket and friction knob. The table is removed by loosening
the friction knob at the base of the table and removing the table from the pedestal. Then loosen
the friction knob at the pedestal base and remove the pedestal. Make sure the pedestal friction
knobs are tight when the table is installed and before operating the boat.
Helm
The helm and engine controls are located on an opening console. Molded-in electronics
storage is located forward of the engine controls.
The helm section of the console is hinged and opens to provide access to service
the helm equipment. To open the helm portion of the console, unscrew the knobs
located in the forward corners of the helm. The helm can be tilted aft to expose
the underside of the helm. Always make sure the helm station clamps are
properly secured when the helm is closed.
ALWAYS MAKE SURE THE HELM STATION KNOBS ARE PROPERLY SE-
CURED BEFORE OPERATING OR TRAILERING YOUR BOAT. IF THE HELM
STATION IS NOT PROPERLY SECURED, IT COULD OPEN UNEXPECTEDLY
AND DAMAGE THE BOAT OR CAUSE LOSS OF CONTROL.
UNDER NO CIRCUMSTANCES SHOULD THE HELM BE OPENED WHEN THE ENGINES ARE
RUNNING. IN SOME SITUATIONS IT IS POSSIBLE
TO ACCIDENTALLY ENGAGE THE ENGINE SHIFT
AND THROTTLE CONTROL INTO GEAR AS THE
HELM IS OPENING. THIS COULD RESULT IN LOSS
OF CONTROL, DAMAGE TO THE BOAT, AND INJURY
TO PASSENGERS.
The electronics locker is located forward of the con-
trols in the console. Electronics are installed or ser-
viced through access panels in the head compartment.
9-6
Helm Seat Control