PURSUIT 2865 DENALI, Owner'S Manual

Page: 46 / 175

2865 DENALI
Supplies electrical current directly to the switch which controls the optional electric head.
Head Macerator
Supplies electrical current to the switch that controls the macerator overboard discharge pump
for the holding tank. This switch should be in the “OFF” position except when pumping out
the holding tank.
Cabin Lights
Supplies 12-volt electrical current to the cabin light switches.
Freshwater System
Supplies 12-volt electrical current directly to the freshwater pump pressure switch located on
the pump. The pressure switch automatically controls the water pump when the system is
activated and properly primed.
Stereo
Supplies 12-volt electrical current to the stereo.
12-volt Accessory
Reserved for additional 12-volt equipment.
Accessory
Reserved for additional 12-volt equipment or the stereo.
4.3 110-volt AC System
The 110-volt AC system is fed by the shore power outlet. It is wired totally separate from the
12-volt DC system and is equipped with galvanic isolator to protect the boat from stray
current. All 110-volt current is distributed to the 110-volt accessories through individual
circuit breakers located in the 110-volt panel. The main breaker in the panel protects the
system from an overload and the reverse polarity light indicates any problems due to an
improper shore power supply. All AC outlets in the cabin are protected by ground fault
interrupts to protect against electrical shock. A cord set is provided to supply
power from the shore power outlet to the boat’s 110-volt AC system.
TO REDUCE THE RISK OF ELECTRICAL SHOCK IN WET WEATHER, AVOID
MAKING CONTACT WITH THE SHORE CABLE OR MAKING A CONNECTION
TO A LIVE SHORE OUTLET. NEVER SPRAY WATER ON ELECTRICAL
4-6