PURSUIT 2865 DENALI, Owner'S Manual

Page: 82 / 175

2865 DENALI
and close the discharge ball valve when pumping is complete.
Notice: The macerator discharge pump can only be run dry for ten seconds. Allowing
the macerator pump to run after the holding tank is empty will cause damage
to the pump.
Maintenance
The head should be cleaned and inspected for leaks regularly. Periodically, check all hoses
and fittings for leaks or signs of deterioration. If a hose or fitting is leaking it should be
repaired or replaced as soon as possible.
Make sure the holding tank vent is clear. If the vent becomes clogged, it will cause the head
to become difficult to flush or could cause the holding tank to be damaged when it is pumped
out.
The holding tank should be pumped out and flushed as needed. Periodically add chemical to
the head and holding tank to help control odor and to chemically break down the waste. The
macerator pump should be sprayed with a metal protector periodically to reduce
corrosion. See the head manufacturer owner’s manual for additional operating
and maintenance information.
THE HEAD SYSTEM MUST BE PROPERLY WINTERIZED BEFORE WINTER
LAY-UP. SEE SECTION ON WINTERIZING.
10-2