PURSUIT 2865 DENALI, Owner'S Manual

Page: 103 / 175

2865 DENALI
in your area, call the “Boating Safety Hotline,” 800-368-5647 or the “Boat U.S.
Foundation Course Hotline,” 800-336-2628 for further information on boating
safety courses.
Notice: If the drive unit hits an underwater object, stop the engine. Inspect the drive
unit for damage. If the unit is damaged, contact your dealer for a complete
inspection
and repair of the unit.
To stop the boat, follow this procedure:
• Allow the engine to drop to the idle speed.
• Make sure the shifting levers are in the neutral position.
Notice: If the engine has been run at high speed for a long period of time, allow it to cool
down by running the engine in the idle position for 3 to 5 minutes.
• Turn the ignition key to the “OFF” position.
After Operation:
• If operating in saltwater, wash the boat and all equipment with soap and water.
• Check the bilge area for debris and excess water.
• Fill the fuel tank to near full to reduce condensation.
• Check that the boat is properly moored.
• Turn off all electrical equipment except the automatic bilge pumps.
• If you are going to leave the boat for a long period of time, put the battery main
switches in the “OFF” position and close all sea cocks.
• Make sure the boat is securely moored.
TO PREVENT DAMAGE TO THE BOAT, CLOSE ALL SEACOCKS BEFORE
12-7