PureStream PureLink VIP-NET-M28A Media Hub, User Manual

Page: 132 / 196

VIP-NET-M28A Network Switch - USER MANUAL
VERSION 1.0
defining TCP parameters will appear. For more details of these fields,
please refer to the help file.
IP Protocol Value
Specific allows you to enter a specific value. The allowed range is 0
to 255. Frames matching the ACE will use this IP protocol value.
IP TTL
Specifies the time-to-live settings for the ACE
Zero : IPv4 frames with a time-to-live value greater than zero must not
be able to match this entry.
Non-zero : IPv4 frames with a time-to-live field greater than zero must
be able to match this entry.
Any : any value is allowed (" don't-care ").
IP Fragment
Specifies the fragment offset settings for the ACE. This includes
settings of More Fragments (MF) bit and Fragment Offset (FRAG
OFFSET) for an IPv4 frame.
No : IPv4 frames whose MF bit is set or the FRAG OFFSET field is
greater than zero must not be able to match this entry.
Yes : IPv4 frames whose MF bit is set or the FRAG OFFSET field is
greater than zero must be able to match this entry.
Any : any value is allowed (" don't-care ").
IP Option
Specifies the options flag settings for the ACE
No : IPv4 frames whose options flag is set must not be able to match
this entry.
Yes : IPv4 frames whose options flag is set must be able to match this
entry.
Any : any value is allowed (" don't-care ").
SIP Filter
Specifies the source IP filter for this ACE
Any : no source IP filter is specified (Source IP filter is " don't-care ").
Host : source IP filter is set to Host . Specify the source IP address in
the SIP Address field that appears.
Network : source IP filter is set to Network . Specify the source IP
address and source IP mask in the SIP Address and SIP Mask fields
that appear.
SIP Address
When Host or Network is selected for the source IP filter, you can
enter a specific SIP address in dotted decimal notation.
SIP Mask
When Network is selected for the source IP filter, you can enter a
specific SIP mask in dotted decimal notation.
DIP Filter
Specifies the destination IP filter for the ACE
Any : no destination IP filter is specified (destination IP filter is " don't-
care ").
Host : destination IP filter is set to Host . Specify the destination IP
address in the DIP Address field that appears.
Network : destination IP filter is set to Network . Specify the
destination IP address and destination IP mask in the DIP Address
and DIP Mask fields that appear.
DIP Address
When Host or Network is selected for the destination IP filter, you
can enter a specific DIP address in dotted decimal notation.
DIP Mask
When Network is selected for the destination IP filter, you can enter
a specific DIP mask in dotted decimal notation.