VIP-NET-M28A Network Switch - USER MANUAL
VERSION 1.0
Static Table
Label
Description
Delete
Check to delete the entry. It will be deleted during the next save.
Port
The logical port for the settings.
VLAN ID
The vlan id for the settings.
IP Address
Allowed Source IP address.
MAC Address
Allowed Source MAC address.
Dynamic Table
This page shows entries in the Dynamic IP Source Guard table. The default value is 20.
The Start from port address, VLAN, MAC address, and IP address input fields allow you to select the
starting point in the table.
Label
Description
Port
The logical port for the settings.
VLAN ID
The vlan id for the settings.
IP Address
Allowed source IP address.
MAC Address
Allowed source MAC address.
ACL
Ports
This page allows you to configure the ACL parameters (ACE) of each switch port. These parameters will
affect frames received on a port unless the frame matches a specific ACE.
Summary of Contents for PureLink VIP-NET-M28A Media Hub
