PureStream PureLink VIP-NET-M28A Media Hub, User Manual

Page: 151 / 196

VIP-NET-M28A Network Switch - USER MANUAL
VERSION 1.0
Warning
Fault Alarm
When any selected fault event happens, the Fault LED on the switch panel will light up and the electric
relay will signal at the same time.
System Warning
SYSLOG Setting
The SYSLOG is a protocol that transmits event notifications across networks. For more details, please refer
to RFC 3164 - The BSD SYSLOG Protocol.
Label Description
Server Mode Indicates existing server mode. When the mode operation is enabled,
the syslog message will be sent to syslog server. The syslog protocol
is based on UDP communications and received on UDP port 514 and
the syslog server will not send acknowledgments back to the sender
since UDP is a connectionless protocol and it does not provide
acknowledgments. The syslog packet will always be sent even if the
syslog server does not exist. Possible modes are:
Enabled : enable server mode
Disabled : disable server mode
SYSLOG Server
IP Address
Indicates the IPv4 host address of syslog server. If the switch provides
DNS functions, it also can be a host name.