PureStream PureLink VIP-NET-M28A Media Hub, User Manual

Page: 100 / 196

VIP-NET-M28A Network Switch - USER MANUAL
VERSION 1.0
SNMP Community Configurations
This page allows you to configure SNMPv3 community table. The entry index key is Community .
Label Description
Delete Check to delete the entry. It will be deleted during the next save.
Community
Indicates the community access string to permit access to SNMPv3
agent. The allowed string length is 1 to 32, and only ASCII characters
from 33 to 126 are allowed.
Source IP Indicates the SNMP source address
Source Mask Indicates the SNMP source address mask
SNMP User Configurations
This page allows you to configure SNMPv3 user table. The entry index keys are Engine ID and User
Name .
Label Description
Delete Check to delete the entry. It will be deleted during the next save.
Engine ID
An octet string identifying the engine ID that this entry should belong
to. The string must contain an even number between 10 and 64
hexadecimal digits, but all-zeros and all-'F's are not allowed. The
SNMPv3 architecture uses User-based Security Model (USM) for
message security and View-based Access Control Model (VACM) for
access control. For the USM entry, the
usmUserEngineID and
usmUserName are the entry keys. In a simple agent,
usmUserEngineID is always that agent's own snmpEngineID value.
The value can also take the value of the snmpEngineID of a remote
SNMP engine with which this user can communicate. In other words,
if user engine ID is the same as system engine ID, then it is local user;
otherwise it's remote user.
User Name
A string identifying the user name that this entry should belong to. The
allowed string length is 1 to 32, and only ASCII characters from 33 to
126 are allowed.
Security Level Indicates the security model that this entry should belong to. Possible