PureStream PureLink VIP-NET-M28A Media Hub User Manual Download Page 75

Page: 75 / 196

VIP-NET-M28A Network Switch - USER MANUAL

VERSION 1.0

Label

Description

Rx and Tx Discovery

The number of discover (option 53 with value 1) packets
received and transmitted.

Rx AND Tx Offer

The number of offer (option 53 with value 2) packets received
and transmitted.

Rx AND Tx Request

The number of request (option 53 with value 3) packets
received and transmitted.

Rx AND Tx Decline

The number of decline (option 53 with value 4) packets
received and transmitted.

Rx and Tx ACK

The number of ACK (option 53 with value 5) packets received
and transmitted.

Rx and Tx NAK

The number of NAK (option 53 with value 6) packets received
and transmitted.

Rx and Tx Release

The number of release (option 53 with value 7) packets
received and transmitted.

Rx and Tx inform

The number of inform (option 53 with value 8) packets
received and transmitted.

Rx and Tx Lease Query

The number of lease query (option 53 with value 10) packets
received and transmitted.

Rx and Tx Lease
Unassigned

The number of lease unassigned (option 53 with value 11)
packets received and transmitted.

Rx and Tx Lease Unkonw

The number of lease unknown (option 53 with value 12)
packets received and transmitted.

Rx and Tx Lease Active

The number of lease active (option 53 with value 13) packets
received and transmitted.

Rx Discarded from
Untusted

The number of discarded packet that are coming from
untrusted port.

Rx Discarded checksum
error

The number of discard packet that IP/UDP checksum is error.

Summary of Contents for PureLink VIP-NET-M28A Media Hub





































































































































































































Search results

Summary of Contents for PureLink VIP-NET-M28A Media Hub

Reviews:

Related manuals for PureLink VIP-NET-M28A Media Hub

Brands by name

Popular brands

PureStream PureLink VIP-NET-M28A Media Hub, User Manual

Search results

Summary of Contents for PureLink VIP-NET-M28A Media Hub

Reviews:

Related manuals for PureLink VIP-NET-M28A Media Hub

Brands by name

Popular brands