PureStream PureLink VIP-NET-M28A Media Hub, User Manual

Page: 130 / 196

VIP-NET-M28A Network Switch - USER MANUAL
VERSION 1.0
to 8.
Frame Type
Indicates the frame type of the ACE. These frame types are mutually
exclusive.
Any : any frame can match the ACE.
Ethernet Type : only Ethernet type frames can match the ACE. The IEEE
802.3 descripts the value of length/types should be greater than or equal to
1536 decimal (equal to 0600 hexadecimal).
ARP : only ARP frames can match the ACE. Notice the ARP frames will not
match the ACE with Ethernet type.
IPv4 : only IPv4 frames can match the ACE. Notice the IPv4 frames will not
match the ACE with Ethernet type.
Action
Specifies the action to take when a frame matches the ACE.
Permit: takes action when the frame matches the ACE.
Deny: drops the frame matching the ACE.
Rate Limiter
Specifies the rate limiter in number of base units. The allowed range is 1 to
15.
Disabled means the rate limiter operation is disabled.
Port Copy
Frames matching the ACE are copied to the port number specified here. The
allowed range is the same as the switch port number range. Disabled means
the port copy operation is disabled.
Logging
Specifies the logging operation of the ACE. The allowed values are:
Enabled : frames matching the ACE are stored in the system log.
Disabled : frames matching the ACE are not logged.
Please note that system log memory capacity and logging rate is limited.
Shutdown
Specifies the shutdown operation of the ACE. The allowed values are:
Enabled : if a frame matches the ACE, the ingress port will be disabled.
Disabled : port shutdown is disabled for the ACE.
Counter Indicates the number of times the ACE matched by a frame.
Label Description
SMAC Filter
(Only displayed when the frame type is Ethernet Type or ARP.)
Specifies the source MAC filter for the ACE.
Any : no SMAC filter is specified (SMAC filter status is " don't-care ").
Specific : if you want to filter a specific source MAC address with the
ACE, choose this value. A field for entering an SMAC value appears.
SMAC Value
When Specific is selected for the SMAC filter, you can enter a specific
source MAC address. The legal format is "xx-xx-xx-xx-xx-xx". Frames
matching the ACE will use this SMAC value.
DMAC Filter
Specifies the destination MAC filter for this ACE
Any : no DMAC filter is specified (DMAC filter status is " don't-care ").
MC : frame must be multicast.
BC : frame must be broadcast.
UC : frame must be unicast.
Specific : If you want to filter a specific destination MAC address with
the ACE, choose this value. A field for entering a DMAC value
appears.