PureStream PureLink VIP-NET-M28A Media Hub, User Manual

Page: 99 / 196

VIP-NET-M28A Network Switch - USER MANUAL
VERSION 1.0
Label Description
Trap Mode
Indicates existing SNMP trap mode. Possible modes include:
Enabled : enable SNMP trap mode
Disabled : disable SNMP trap mode
Trap Version
Indicates the supported SNMP trap version. Possible versions
include:
SNMP v1 : supports SNMP trap version 1
SNMP v2c : supports SNMP trap version 2c
SNMP v3 : supports SNMP trap version 3
Trap Community
Indicates the community access string when sending SNMP
trap packets. The allowed string length is 0 to 255, and only
ASCII characters from 33 to 126 are allowed.
Trap Destination
Address
Indicates the SNMP trap destination address
Trap Destination Port
This is the SNMP Trap destination port used by the SNMP Trap
option for event notification. You can optionally change the IP
port on which to send the SNMP trap, this must be the actual
port on which the SNMP trap host listens. The typical, well-
known port for SNMP traps is 162 (default).
Trap Inform Mode
Indicates the SNMP trap inform mode. Possible modes include:
Enabled : enable SNMP trap inform mode
Disabled : disable SNMP trap inform mode
Trap Inform
Timeout(seconds)
Configures the SNMP trap inform timeout. The allowed range
is 0 to 2147.
Trap Inform Retry Times
Configures the retry times for SNMP trap inform. The allowed
range is 0 to 255.
Trap Probe Security
Engine ID
Indicates the SNMP trap probe security engine ID mode of
operation. Possible values are:
Enabled : Enable SNMP trap probe security engine ID mode
of operation.
Disabled : Disable SNMP trap probe security engine ID mode
of operation.
When is enabled, the ID will be probed automatically.
Otherwise, the ID specified in this field is used.
Trap Security Engine ID
Indicates the SNMP trap security engine ID. SNMPv3 sends
traps and informs use USM for authentication and privacy. A
unique engine ID for these traps and informs is needed. When
"Trap Probe Security
Engine ID" is enabled, the ID will be probed automatically.
Otherwise, the ID specified in this field is used. The string must
contain an even number (in hexadecimal format) with number
of digits between 10 and 64, but all-zeros and all-'F's are not
allowed.
Trap Security Name
Indicates the SNMP trap security name. SNMPv3 traps and
informs using USM for authentication and privacy. A unique
security name is needed when traps and informs are enabled