PT PT610, Basic Instruction Manual, Page: 3 / 92

CONTENTS
6.2.5.7 [157 LOCAL P2] – Local Port 2....................67
6.2.5.8 [158 LOCAL P3] – Local Port 3....................67
6.2.5.9 [159 DNS] – DNS address...........................67
6.2.5.10 [15A MAC ADR] – MAC Address...............67
6.2.5.11 [15B TIMEOUT] – Idle timeout...................67
6.2.5.12 [15C CR-LF] – CR+LF................................67
6.2.5.13 [15D Delay] – Response speed.................67
6.2.5.14 [15E REMOTE IP] – Remote IP Addr........67
6.2.5.15 [15F REMOTE PO] – Remote Port............67
6.2.6 [16_] – Printer.............................................68
6.2.6.1 [161 FORMAT] – Print Format.....................68
6.2.6.2 [162 METHOD] – Print activation.................68
6.2.6.3 [163 PRT MSG] – Display “PRINTING”.......68
6.2.6.4 [164CN] – Print Ticket Number....................68
6.2.6.5 [165 DATE] – Print Date...............................68
6.2.6.6 [166 Time] – Print time.................................68
6.2.6.7 [167 ID1] – Print ID1.....................................68
6.2.6.8 [168 ID2] – Print ID2.....................................68
6.2.7 [17_] – Print Setup......................................68
6.2.7.1 [171 HEADER1] – Ticket header.................68
6.2.7.2 [172 HEADER2] – Ticket header.................68
6.2.7.3 [173 HEADER3] – Ticket header.................68
6.2.7.4 [174 FOOTER1] – Ticket footer...................68
6.2.7.5 [175 FOOTER2] – Ticket footer...................68
6.2.7.6 [176 LF BEFORE] – LF before print.............68
6.2.7.7 [177 LF AFTER] – LF after print...................69
6.2.7.8 [178 FORM F] – Form feed..........................69
6.2.7.9 [179 LEFT SP] – Left margin.......................69
6.2.7.10 [17A COPY] – Left margin..........................69
6.2.8 [18_] – Barcode/ID Setup...........................69
6.2.8.1 [181 STX] – STX..........................................69
6.2.8.2 [182 PREFIX] – Prfix discard.......................69
6.2.8.3 [183 LENGTH] – Data length.......................69
6.2.8.4 [184 AUTOSAVE] – Auto-save data............69
6.2.9 [19_] – Option Card.....................................69
6.2.9.1 [19_] – Analogue output...............................69
6.2.9.2 [19_] – Ethernet TCP/IP...............................70
6.2.9.3 [19_] – PROFIBUS.......................................70
6.2.9.4 [19_] – PROFINET, Ethernet/IP...................70
6.2.9.5 [19_] – CANopen..........................................70
6.2.9.6 [19_] – Ethercat............................................70
6.2.9.7 [19_] – CC-Link.............................................70
6.2.9.8 [19_] – Powerlink..........................................71
6.3 [2--] – CONFIGURATION PARAMETERS..........71
6.3.1 [21_] – Display and Sound..........................71
6.3.1.1 [211 LIGHT] – Backlight...............................71
6.3.1.2 [212 COLOR] – Backlight colour..................71
6.3.1.3 [213 KEYSOUN] – Key sound.....................71
6.3.1.4 [214 REFRESH] – Refresh rate...................71
6.3.2 [22_] – Information display..........................71
6.3.2.1 [221 TIME] – Weighing Mode.......................71
6.3.2.2 [222 DATA] – Informative data.....................71
6.3.3 [23_] – Startup............................................72
6.3.3.1 [231 TARING] – Tare mode.........................72
6.3.3.2 [232 AUTOT] – Auto Tare............................72
6.3.3.3 [233 AUTO CLR] – Auto Tare Clear............72
6.3.3.4 [234 PWR TARE] – Save Tare....................72
6.3.3.5 [235 Filter] – Adaptive filter..........................72
6.3.3.6 [236 LANGUAGE] – Language....................72
6.3.4 [24_] – Function keys..................................72
6.3.4.1 [241 */PCS KEY] – <☼>, <PCS> function...72
6.3.4.2 [242 Δ/APW KEY] – <Δ>, <APW> function. 72
6.3.4.3 [243 ID2/* KEY] – <ID2>, <☼> function.......72
6.3.4.4 [244 RGHT IR] – <IRR> function.................73
6.3.4.5 [245 LEFT IR] – <IRL> function...................73
6.3.5 [25_] – Initial data entry..............................73
6.3.5.1 [251 DATE] – Date format............................73
6.3.5.2 [252 Date set] – Date setting.......................73
6.3.5.3 [253 TIME SET] – Time setting....................73
6.3.5.4 [254 CN] – Ticket number............................73
6.3.5.5 [255 S.NAME] – Scale name.......................73
6.3.6 [26_] – Passwords......................................73
6.3.6.1 [261 KEY LOCK] – Keys password.............73
6.3.6.2 [262 USER] – User password......................73
6.3.6.3 [263 SERVICE] – Service password............73
6.4 [3--] – APPLICATION PARAMETERS.................73
6.4.1 [31_] – EzAz smart applications.................73
6.4.1.1 [311 APPLICA] – EzAz application..............73
6.4.1.2 [312 LIMITS] – Limit mode...........................74
6.4.1.3 [313 INFODIS] – Information display...........74
6.4.1.4 [314 DISPLAY] – Auxiliary display...............74
6.4.1.5 [315 Colors] – Backlight colours..................74
6.4.1.6 [316 CHANGE] – Backlight change.............74
6.4.1.7 [317 ACOUSTI] – Warning sound................74
6.4.2 [32_] – EzAz Use partameters....................74
6.4.2.1 [321 START] – Starting the application.......74
6.4.2.2 [322 FILLING] – Filling mode.......................74
6.4.2.3 [323 STAREDELA] – Delay auto-tare..........74
6.4.2.4 [324 TOTAL] – Totalling mode.....................74
6.4.2.5 [325 GT ERASE] – Grand Total erase.........74
6.4.2.6 [326 OUTPUTS] – Output relay switching...74
6.4.3 [33_] – Dynamic in motion Weighing..........74
6.4.3.1 [331 OPERATE] – Dynamic start.................75
6.4.3.2 [332 FILTER] – Dynamic filter......................75
6.4.4 [34_] – Key locking.....................................75
6.4.4.1 [341 ON/OFF]...............................................75
6.4.4.2 [342 ID1, DATE]...........................................75
6.4.4.3 [343 ID2, ☼, G/N].........................................75
6.4.4.4 [344 M+, SP].................................................75
6.4.4.5 [345 MRC, PRINT].......................................75
6.4.4.6 [346 ☼, PCS, UNIT].....................................75
6.4.4.7 [347 Δ, APW, HIGHRE]................................75
6.4.4.8 [348 TARE]...................................................75
6.4.4.9 [349 SET/CLR].............................................75
6.4.4.10 [34A ZEROING]..........................................75
6.4.4.11 [34B ENTER]..............................................75
6.4.4.12 [34C NUMERIC].........................................75
6.4.4.13 [34D RGHT IR]...........................................75
6.4.4.14 [34E LEFT IR].............................................75
6.4.5 [35_] – Digital inputs...................................75
6.4.5.1 [351 INPUT 1] – Input 1 function..................75
6.4.5.2 [352 INPUT 2] – Input 2 function..................76
6.4.5.3 [353 INPUT 3] – Input 3 function..................76
6.4.5.4 [354 INPUT 4] – Input 4 function..................76
6.4.6 [36_] – Digital outputs.................................76
6.4.6.1 [361 OUPUT 1] – Output 1 function.............76
6.4.6.2 [362 OUPUT 2] – Output 2 function.............76
6.4.6.3 [363 OUPUT 3] – Output 3 function.............76
6.4.6.4 [364 OUPUT 4] – Output 4 function.............76
6.4.6.5 [365 OUPUT 5] – Output 5 function.............76
6.4.6.6 [366 ZR [d]] – In-Zero range.........................77
6.4.6.7 [367 OUPUTS IMME] – Output relay mode.77
6.4.7 [37_] – Identification data............................77
6.4.7.1 [371 NAMEDIS] – ID name display..............77
6.4.7.2 [372 ID1NAME] – ID 1 data name...............77
6.4.7.3 [373 ID1LINK] – Data linked to ID1..............77
6.4.7.4 [374 ID2 NAME] – ID2 data name...............77
6.4.7.5 [375 ID2 LINK] – Data linked to ID2.............77
6.5 [5--] – SCALE PARAMETERS.............................78
6.5.1 [51_] – Scale Setup....................................78
6.5.1.1 [511 APROVAL] – Approved/Industrial........78
6.5.1.2 [512 HIGHRES] – Hi-Res operation.............78
6.5.1.3 [513 PWR ZERO] – Zero at power on.........78
6.5.1.4 [514 ZEROING] – Zero key range...............78
6.5.1.5 [515 AZTRACK] – Auto. Zero tracking.........78
6.5.1.6 [516 STABLE] – Stability band.....................78
6.5.1.7 [517 STBTIME] – Stability time....................78
6.5.1.8 [518 MIN TARE] – Min. Auto-Tare...............78
6.5.1.9 [519 MINWEIGT] – Min. weight for print......78
6.5.1.10 [51A TILT] – Tilt switch..............................78
6.5.2 [52_] – Scale Build......................................78
6.5.2.1 [521 UNIT] – Weight units............................78
6.5.2.2 [522 RANGE] – Single/Multi range..............79
6.5.2.3 [523 MAX] – Capacity/Division.....................79
6.5.2.4 [524 OVER] – Over range............................79
6.6 [6--] – CALIBRATE/ADJUST...............................79
6.6.1 [61_] – Calibration.......................................79
6.6.1.1 [611 TEST WEIGHT] – With weight.............79
6.6.1.2 [612 LINEARIZATIO] – Linearisation...........79
6.6.1.3 [613 ELECTRONIC] – vCal..........................80
6.6.2 [62_] – Adjustment......................................80
6.6.2.1 [621 ZERO ADJUSTM] – Adjust zero..........81
6.6.2.2 [622 SPAN ADJUSTM] – Adjust span.........81
6.6.2.3 [623 S UNDER LOAD] – Adj. Span loaded. 81
6.6.2.4 [624 GRAVITY CAL] – Calibration gravity...81
6.6.2.5 [625 GRAVITY USAG] – Installed gravity....81
6.6.3 [63_] – Coefficients.....................................81
6.6.3.1 [631 TEST WEIGHT] – Calibration weight...81
6.6.3.2 [632 ZERO COEFFIC] – Zero coeficient.....81
6.6.3.3 [633 GAIN COEFFIC] – Over range............82