PT610, PT620, PT630
Instruction Manual
46
Freefall or FINE cutoff is the amount of material that keeps falling into the container after feeding has
been stopped.
This may need to be determined by trial.
Example : If we want fill 1000g into the container in deviation entry type, container weight is between
150g and 190g, the coarse feeding is up to 900g and fine feeding is up to 980g (freefall is 20g);
We shall enter values Target = 1000g, Coarse= 100g, Fine = 20g, Taremin= 150g and Taremax = 190g.
Empty value might be 100g.
If the target is to be increased to 1100g, it may not be necessary to change coarse and fine values at
entry types deviation and ratio.
Enter the nominal value and limits by keys
1. Press the
<SET>
key for more than 2 seconds.
2. The current target value is seen on the display as
[ TARGET: 1000g]
. Enter the new value with the
numerical keys. Press the
<ENTER>
key to save it or press the
<ESC>
key to return to operation
without saving.
3. The current coarse value is seen
[ COARSE: 100g ]
. Enter the new value with the numerical keys.
Press the
<ENTER>
key to save it or press the
<ESC>
key to return to operation without saving.
4. The current fine value is appears
[ FINE: 20g]
. Enter the new value with the numerical keys. Press
the
<ENTER>
key to save it or press the
<ESC>
key to return to operation without saving.
5. The minimum tare weight is displayed
[ TAREMIN: 150g]
. Enter the new value with the numerical
keys. Press the
<ENTER>
key to save it or press the
<ESC>
key to return to operation without
saving.
6. The maximum tare weight is shown as
[ TAREMAX : 190g]
. Enter the new value with the numerical
keys. Press the
<ENTER>
key to save it or press the
<ESC>
key to return to operation without
saving.
7. The
[ EMPTY: 100g]
prompt indicates the current empty range of the platform. Enter the new value
with the numerical keys.
8. Press the
<ENTER>
key to return the operation after saving the entry or press the
<ESC>
key to go
back operation without saving the new empty range.
Record the product into the SET memory
1. Press the
<MEM>
key for more than 2 seconds. The
[ MEMORY]
prompt appears.
2. Press the
<SET>
key. The last used SET memory code appears, I.e.
[ SET :001 ]
.
3. Enter the a memory code if required by using the numerical keys and press the
<ENTER>
key.
4. The previous target value is seen on the display as
[ SET 001: TARGET ], [ 5.00 kg ]
. Enter the
new value with the numerical keys and press the
<ENTER>
key.
5. The
[ COARSE: 1.80 ]
prompt appears on the display. Enter the new value with the numerical keys.
Press the
<ENTER>
key to save it or press the
<ESC>
key to return to operation without saving.
6. The
[ FINE: 0.20 ]
prompt appears on the display. Enter the new value with the numerical keys.
Press the
<ENTER>
key to save it or press the
<ESC>
key to return to operation without saving.
7. The
[ TAREMIN : 0.60 ]
prompt appears on the display. Enter the new value with the numerical
keys. Press the
<ENTER>
key to save it or press the
<ESC>
key to return to operation without
saving.
8. The
[ TAREMAX : 1.20 ]
prompt appears on the display. Enter the new value with the numerical
keys. Press the
<ENTER>
key to save it or press the
<ESC>
key to return to operation without
saving.
9. The
[ EMPTY: 1.00 ]
prompt appears on the display. Enter the new value with the numerical keys.
10. Press the
<ENTER>
key to go to the following memory location after saving or press the
<ESC>
key
to return to operation without saving.
Select the product from SET memory
1. Press the
<SET>
key for more than 2 seconds. The current target value appears on the display as
[ TARGET: 1250 kg ]
.
2. Press the
<MEM>
key to enter SET memory. The last used SET memory code appears on the
display as
[ SET :001]
.
3. Enter the memory code of the product by using the numerical keys and press the
<ENTER>
key.
4. The selected product limits are loaded for use after displaying values.
5. Or press the
<ESC>
key to exit without saving.