PT610, PT620, PT630
Instruction Manual
65
6.2.3.2 [132 BAUD] – Baud Rate
1200 = 1200
2400 = 2400
4800 = 4800
+
9600 = 9600
19K2 = 19200
38K4 = 38400
57K6 = 57600
6.2.3.3 [133 LENGTH] – Data Length
7 = 7 bits
8 = 8 bits
6.2.3.4 [134 PARITY] – Parity
+
NO = No parity
ODD = Odd parity
EVEN = Even parity
6.2.3.5 [135 CSUM] – Checksum
+
NO = no checksum
YES = checksum enabled
Enable or disable for continuous data format and BSI command mode.
6.2.3.6 [136 CR] – Carriage Return
NO = no CR
+
YES = CR enabled
Enable or disable sending of the ASCII 13 character for continuous data format.
6.2.3.7 [137 LFEED] – Line Feed
NO = no Line Feed
+
YES = Line Feed enabled
Enable or disable sending of the ASCII 10 character for continuous data format.
6.2.3.8 [138 DELAY] – Response Speed
000 to 999 miliseconds (50 default)
Data output delay for Modbus and BSI formats; delay between continuous format data packets.
Note: This property is very helpful for slow PLC systems.
6.2.3.9 [139 ADDRESS] – Port address
00 to 99 (01 default, 00 = transmission without address)
6.2.4 [14_] – USB
This sub-block includes the parameters for the USB serial interface
6.2.4.1 [141 FORMAT] – Data Format
+
NO = Port is disabled
CONT = Continuous data output
FAST = High speed continuous data output
BSI = BSI format for PC, PLC interface
6.2.4.2 [142 CSUM] – Checksum
+
NO = no checksum
YES = checksum enabled
Enable or disable for continuous data format and BSI command mode.
6.2.4.3 [143 CR] – Carriage Return
NO = no CR
+
YES = CR enabled
Enable or disable sending of the ASCII 13 character for continuous data format.
6.2.4.4 [144 LFEED] – Line Feed
NO = no Line Feed
+
YES = Line Feed enabled
Enable or disable sending of the ASCII 10 character for continuous data format.
6.2.4.5 [145 DELAY] – Response Speed
000 to 999 miliseconds (50 default)
Data output delay for Modbus and BSI formats; delay between continuous format data packets.
Note: This property is very helpful for slow PLC systems.