3. X-axis & Extruder assembly
Original Prusa MINI+ kit assembly
57
STEP 19
Mounting the X-axis motor
Place the X-axis motor like in the picture. See the cable direction.
Put the X-axis on the X-axis motor and align the holes on both parts. Make sure
that smooth rods are facing to the right.
Fix both parts together with two M3x12 screws.
STEP 20
X-axis belt guidance
Place the X-axis like in the picture.
Take the X-axis belt and guide it in the upper position around the pulley in the X-
end.
Insert the belt along the entire length of the upper groove in the X-carriage.
Take the second end of the belt and guide it around the pulley in the X-end and
throught the hole in X-carriage.
Summary of Contents for Original Prusa MINI
