1. Introduction
12
Original Prusa MINI+ kit assembly
STEP 12
Reward yourself
Building the MINI+ printer is a
challenge unlike any other and you
should reward yourself for every
milestone you reach.
That is why a
bag of Haribo Bears is included!
The biggest issue from the
previous builds
(MK3S+, SL1)
which we had to address was
inadequate bear consumption.
Many of you didn't have enough
bears for all chapters, some even
ate them all before they started!
After completing each chapter or
challenging section of the chapter,
you will be prompted to replenish
energy for the following steps.
Don't eat all the bears before you
start or at once!
Not following
instructions will have serious
consequences, we are currently
assembling
Prusa Haribo tactical
squad
for this matter.
Hide the Haribo for now!
From our
experience, an unattended bag with
sweets tends to suddenly
disappear. We are still investigating
this phenomenon.
All information provided in this step
is based on a long-term very serious
research study ;)
Summary of Contents for Original Prusa MINI
