PRÜFTECHNIK VIBXPERT II, Operating Instructions Manual

Page: 86 / 176

3-36
VIBXPER
T II 05.2012
Recording
With the ‘Recording’* function, you can perform measurements de-
pendent on time or rotational speed. For example, this method can
be used to record measurement values under certain operating condi-
tions (= rpm range) or at fixed time intervals.
Availability and restrictions
Recording is available in 'Multimode' for every measurement, with the
following exceptions:
- c
oastdown curve
- i
mpact test
- t
ime waveform recorder
- p
hase
- c
ross
c
hannel
Restrictions also apply to the following measurements:
- s
pectrum
: Averaging is not possible for rpm-controlled recordings.
- t
ime waveform
: The 'time synchronous' averaging type is not per-
missible.
- m
ulti measurement tasks
: rpm-controlled recording is not possible.
- s
hock pulse measurement
(
roller Bearing condition
) : rpm-controlled
recording is only possible without normalization.
Configuration
• Click on 'Multimode' in the start screen.
• Select the measurement for which you want to set up recording.
• Press the MENU key and click on 'Recording' (see below).
* Firmware module ‘Recording’ (VIB
5.385) must be registered.
Opening the recording
configuration window
Recording