PRÜFTECHNIK VIBXPERT II, Operating Instructions Manual

Page: 60 / 176

3-10
VIBXPER
T II 05.2012
MENU functions in the tree / list view
• Press the MENU key in the tree / list view (see below):
s
kip
/ u
nskip
If a machine is not in operation during a route, you can skip all
measurement tasks planned at this machine. The measurement
tasks that are associated with the highlighted route element and
were not measured are left out. This procedure is reversible.
e
vent
/c
omment
Enter an event or comment (see p. 3-26).
d
elete result
Delete the measurement result for the selected element and all
sub-elements. This procedure cannot be reversed!
s
et unmeasured
Change the status of the associated measurement task to 'not mea-
sured'. All existing results are retained.
r
eset reference rpm
The reference rpm of the machine train or the production line
speed is reset and can be measured again.
B
reak down multitask
All the multi-measurement tasks that are assigned to the high-
lighted element are broken down into the individual measurement
tasks. This procedure is irreversible!
B
reak near location
The optimized coordination of the measurement tasks for neigh-
boring measurement locations is disabled. The measurements no
longer take place simultaneously.
r
eset multiplexer
If the connection to the multiplexer is interrupted during the mea-
surement or between measurements, the addressing has to be rest
manually (see p. 3-43).
Measurement - Route
Left:
Menu functions
in the Tree view
Right:
Info dialog
For mechanically coded
VIBCODE-locations, the code ring pat-
tern can be shown.