Proyecson PAA20+, Installation Manual

Page: 56 / 148

8.2.4 Setup output cues for Doremi DCP and SV servers using xml
library
The second method to set-up the cues for the PAA20+ in a Doremi server is
using the “PAA20V2.xml” file, available in the FTP: ftp://manual:proyec-
son@ftp3.proyecson.com/manual/paa20+ , to create a cues library for the
device in the server. Using this method you can use the PAA20+ inputs and
the outputs with the Doremi server.
To do so you must follow these steps:
1. Connect a PC or laptop to the same network where the Doremi server
is connected. To ensure that they are in the same network you may
“ping” the server from the PC.
2. Open a ftp client and connect to the server using the server IP. You
must log in as admin using the admin password supplied by Doremi.
You can see an example in figure 8.2.4A . For this example we used
the “WinSCP” ftp client and a server with IP address 12.100.85.111.
Figure 8.2.4A
INSTALLATION MANUAL: PAA20+ V 2.0 (10/2021) 56