manual
Page
20
of
37
version 01
The illustration shows the cable columns with the shifting device. For this a space f approx. 20m² must
be calculated.
Maximum range of motion of the version with shifting device
The training device must be placed on a level, impact-resistant surface. In the case of small uneven
surfaces, these can be compensated for by the adjustable feet to be attached or attached to the device
or a flat surface must be created by using suitable underlay material made of compensating plates or
heavy-duty plastic. Care must be taken to ensure that the levelling materials are not susceptible to
rusting.
For damping, we recommend, if it is necessary, placing rubber buffer material underneath, which can be
purchased as an accessory. When using PVC flooring, make sure that the rubber sheets can cause
reactions with the PVC. Please use the appropriate cork boards.
Avoid hard, abrupt contact with the equipment.
An important prerequisite for the proper functioning of the training device with plug-in weights is the
alignment with a spirit level. The units can be used free-standing in the "Stand" version or screwed to
the wall as the "Wall" version using suitable fixing materials.
Avoid placing the units in heavily frequented rooms or location close to doors and passageways.
approx. 6m
appr
ox. 3
,5
m
Ø ≥2m
Ø ≥2m
