manual
Page
18
of
37
version 01
6
Preparation
6.1
Transport
The devices are usually delivered completely assembled by our employees or by a forwarding agent. In
rare cases it may be necessary for transport reasons to ship the equipment partially dismantled (e.g.
stand versions). In these cases, please use the corresponding assembly instructions and follow the
instructions given there or the instructions within this operating manual!
6.2
Storage
The storage location of the devices should be dry, seawater-free and dust-protected and should have a
storage temperature between +5°C and +45°C. Protect the equipment from shocks, scratches and
moisture.
6.3
Installation
During installation, it is important to know the maximum amount of movement to be achieved for each
version to be installed. A distinction is made between the free-standing version fixed to the wall and the
combination of the cable column with the shifting device. In general, it must be ensured that the distance
of 1 meter - based on the range of movement - to other devices is maintained during installation.
The following illustrations clearly show the space requirements to be expected for the individual versions.
