72
Hint:
Generally, the IRQ Level will be the cause of the
resource conflict. You may find that your computer has
no free IRQ available for use. In this case, try setting
the IRQ to a value of 3 or 4, which typically corre-
sponds to COM2 or COM1, respectively. If there is no
free IRQ, and you are actively using both COM1 and
COM2 or other devices are using these resources, then
you will need to remove and uninstall one of the other
devices from the computer before the RangeLAN2
Card may be used.
Problem 2: After installing the driver and restarting the computer,
the following error message appears:
Solution 2: This error will appear if the RangeLAN2 PC Card is
not working properly but the RangeLAN2 Utilities have been
successfully installed. Most likely, this is due either to a resource
conflict. Refer to Solution 1 for more information about this.
Note that the RangeLAN2 API Protocol is not installed on Win-
dows NT computers.
