41
RL2PCM.COM is a DOS ODI driver. RL2PCM.DOS is a DOS
real-mode NDIS 2 driver.
If the installation procedure does not have an “OEM-supplied”
option, choose a network interface card from the given list. This
card’s ODI or NDIS driver will then be installed. After installa-
tion, you will need to manually search for all instances of this
driver and replace them with either RL2PCM.COM if an ODI
driver was installed or RL2PCM.DOS if an NDIS driver was
installed. Additionally, you will need to replace the installed
driver’s configuration with the RangeLAN2 options in the
ASCII-editable NET.CFG or PROTOCOL.INI file for the ODI
or NDIS driver respectively.
Setting Parameters for ODI and NDIS Drivers
A sample NET.CFG and PROTOCOL.INI files are listed:
ODI - NET.CFG
LINK DRIVER RL2PCM
int
5
Sets Interrupt (IRQ) line to be used. Valid
options are 3, 4, 5, 7, 10, 11, 12, or 15.
port
270
Sets the I/O Port Address.
mem #1
D000
Sets the PCMCIA CIS memory space.
domain
0
Sets the network Domain. This must match
the Domain of the server or Access Point to
which you want to connect and be a number
between 0 and 15.
station_type
0
Sets the status of the RangeLAN2 7420 card
as Master (2), Alternate Master (1), or non-
master (0) Station.
frame ethernet_802.3
Indicates that RangeLAN2 sends Ethernet
packets that follow the 802.3 specification.