68
A resource conflict occurs when another device is already using
the Interrupt Request (IRQ), I/O Base Address, or Memory
Range for which the RangeLAN2 PC Card is configured. The
RangeLAN2 PC Card may use Interrupt Request (IRQ) 3, 4, 5, 7,
9, 10, 11, 12, or 15.
Highlight each resource entry for which there is a conflict and
click the <Change Setting...> button to configure its value. For
example, highlight the Interrupt Request entry and click <Change
Settings...> to change the value for the Interrupt Request, as
shown below. Note that you may need to uncheck the “Use
automatic settings” box before you can click the <Change Set-
tings> button.
