Provision DVR-906M System Manual Download

Page: 3 / 73

TABLE OF CONTENTS

PRO-VISION

Video Systems

DVR-906M SYSTEM GUIDE

provisionusa.com

INSTALLATION .................................................................................................................. 2

Installation Quick Guide ................................................................................................ 2

Product Contents .......................................................................................................... 3

Understanding the System ........................................................................................... 7

DVR Installation .......................................................................................................... 12

Analog Camera Installation ........................................................................................ 14

Digital HD Camera Installation ................................................................................... 24

Display Installation ...................................................................................................... 44

External Trigger Inputs ............................................................................................... 46

Wi-Fi Antenna Installation ........................................................................................... 47

Event Marker Button Installation ................................................................................ 48

GPS Receiver Antenna Installation ............................................................................ 49

Solid-State Drive (SSD) Installation ........................................................................... 50

CONFIGURATION ............................................................................................................ 51

DVR Status Lights ...................................................................................................... 51

Connecting to the DVR ............................................................................................... 52

Setup Wizard .............................................................................................................. 52

Basic DVR Settings .................................................................................................... 53

Advanced DVR Settings ............................................................................................. 57

OPERATION ..................................................................................................................... 62

DVR Status Lights ...................................................................................................... 62

Viewing Cameras on a Smart Device ......................................................................... 63

Viewing Cameras on a Display................................................................................... 63

View Files on Web ...................................................................................................... 64

Accessing Stored Video Files ..................................................................................... 64

TROUBLESHOOTING ...................................................................................................... 65

COMPLIANCE .................................................................................................................. 71

WARRANTY ..................................................................................................................... 71

Please read this manual carefully before use and keep it for future reference.

Understanding this manual prior to installation will greatly reduce the time needed for system installation.

Technical support is available Monday thru Friday from 8:00 AM to 5:00 PM EST for questions.

Summary of Contents for DVR-906M










































































Search results

Summary of Contents for DVR-906M

Reviews:

Related manuals for DVR-906M

Brands by name

Popular brands

Provision DVR-906M, System Manual

Search results

Summary of Contents for DVR-906M

Reviews:

Related manuals for DVR-906M

Brands by name

Popular brands