Protech Systems PA-3222, User Manual

Page: 203 / 249

Chapter 5 BIOS Setup
PA-3222 SERIES USER MANUAL Page: 5-22
5.4.7 Advanced
– IDE Configuration (AHCI Mode)
Menu Path Advanced > IDE Configuration
The IDE Configuration allows users to enable / disable the SATA controller as well
as the operational mode after the SATA controller is enabled. The following screen
indicates the functions available when the SATA hard drive is set to work in AHCI
mode.
IDE Configuration Screen – AHCI Mode
BIOS Setting Options Description/Purpose
SATA Controller(s)
- Disabled
- Enabled
Enables or Disables the on-chip SATA
Device. Default: Enabled.
SATA Test Mode
- Disabled
- Enabled
Enables or disables SATA Test Mode.
SATA Speed Support
- GEN1
- GEN2
Gen1 mode sets the device to 1.5 Gbit/s
speed.
Gen2 mode sets the device to 3 Gbit/s
speed (in case it is compatible).
SATA ODD Port
- Port0 ODD
- Port1 ODD
SATA ODD is Port0 or Port1