Protech Systems PA-3222, User Manual

Page: 106 / 249

Chapter 4 Software Utilities
PA-3222 SERIES USER MANUAL Page: 4-21
ESC - n
[Name] Turn underline mode on/off.
[Format]
ASCII ESC - n
Hex. 1B 2D n
Decimal 27 45 n
[Range]
0
≤ n ≤ 2
Initial Value n = 0
[Description]
This command enables the print data following it to be printer out underlined.
The underline mode varied depending on the following values of n:
n Function
0 Turns off underline mode
1 Turns on underline mode, set at 1-dot thick
2 Turns on underline mode, set at 2-dot thick
ESC 2
[Name] Select default line spacing.
[Format]
ASCII ESC 2
Hex. 1B 32
Decimal 27 50
[Range] N/A
[Description]
This command sets the default line spacing The default line spacing is
approximately 4.25 mm, which is equivalent to 34 dots.
ESC 3 n
[Name] Set line spacing.
[Format]
ASCII ESC 3 n
Hex. 1B 33 n
Decimal 27 51 n
[Range]
0
≤ n ≤ 255
Initial Value n = 34
[Description]
This command sets the line spacing using a following rule.
Line spacing = n x (vertical or horizontal motion units)