ProSoft RadioLinx FH Series User Manual Download Page 56

Page: 56 / 151

RLX-FHE, RLX-FHES, RLX-FHS

♦

RadioLinx FH

Network Configuration

Frequency-Hopping Industrial Radio

Page 56 of 151

ProSoft Technology, Inc.

November 25, 2008

The new radio icon image appears and is superimposed over part of the Master
Radio icon.

Move (click and drag) the additional Remote radio icon off the Master Radio icon.

Continue on to Graphically Define the RF Link (page 58) to define the
communication links between radios.

Note:

See When to Re-Configure Radios (page 73) to ensure all radios will be updated.

7.5 Add

Repeaters

The following illustration shows how to

Add a Repeater

to the Network. After

selecting the add repeater function from the menu, a repeater icon will appear on
the Graphical User Interface (GUI).

Summary of Contents for RadioLinx FH Series
























































































































































Search results

Summary of Contents for RadioLinx FH Series

Reviews:

Related manuals for RadioLinx FH Series

Brands by name

Popular brands

ProSoft RadioLinx FH Series, User Manual

Search results

Summary of Contents for RadioLinx FH Series

Reviews:

Related manuals for RadioLinx FH Series

Brands by name

Popular brands