RLX-FHE, RLX-FHES, RLX-FHS
♦
RadioLinx FH
Reference
Frequency-Hopping Industrial Radio
Page 124 of 151
ProSoft Technology, Inc.
November 25, 2008
Radio Name:
The name of the radio, configured on the Radio Configuration
dialog box.
Address:
This radio's address on the network. The master radio is always 1.
Serial Number:
This is the radio's serial number.
Firmware Version:
The radio's firmware version. All radios on the network
must use the same firmware version.
Hardware:
The radio's hardware version.
FPGA
: the version number of the Field Programmable Gate Array logic in the
radio. This logic determines the hardware characteristics of the radio.
Baudrate:
The configured baud rate for this radio.
Channel Number:
The configured channel number for this radio. All radios
on the network must use the same channel number.
Network Type:
This is the network type configured on the Network
Properties dialog box.
Signal / Noise:
Signal-to-Noise value is the ratio of Signal-Strength to Noise-
Strength.
Signal Strength (RSSI):
The current signal strength (Received Signal
Strength Indicator) in dBm. The graph to the right of this field shows the
signal strength relative to 100%.
Link Status:
The Link Status indicator changes color according to the quality
of the link:
o
Red: Poor
o
Yellow: Fair
o
Green: Good
Messages
: indicates if the radio is responding or not.
OK:
Click the OK button to save your selection and close the dialog box.
15.1.24
Radio Status Dialog Box - IFH Radio
This dialog box opens when you select an IFH radio in the Diagnostic view, and
then choose Properties from the Radio menu. ControlScape populates this dialog
box with information retrieved from the radio.
Note:
The information on this dialog box is provided for your reference, and cannot be modified.
Serial Number:
This is the radio's serial number.
Radio Type:
This is the radio type, for example "IFH Serial" or "IFH
Ethernet".
Firmware Version:
The radio's firmware version. All radios on the network
must use the same firmware version.
Address:
This radio's address on the network. The master radio is always 1.
Channel Number:
The configured channel number for this radio. All radios
on the network must use the same channel number.
Transmit Power:
The configured output power in dBm (mW) for this radio.
Wireless Link Rate:
The current link rate (connection speed) reported by the
radio.
Temperature:
The current internal temperature of the radio, reported in
degrees Celsius.
Summary of Contents for RadioLinx FH Series
Page 6: ......
