RLX-FHE, RLX-FHES, RLX-FHS
♦
RadioLinx FH
Existing Network Maintenance
Frequency-Hopping Industrial Radio
Page 76 of 151
ProSoft Technology, Inc.
November 25, 2008
Password Protection
If no password protection was set up for the network, the "Configure" view will be
opened. If password protection was set up, the "Configuration Access Password"
dialog box will appear, requiring the user to enter the password before
proceeding.
After the password has been entered, it will be checked against the password in
the file. If they do not match, the following dialog box will appear. Click OK to
return to the "Configuration Access Password" dialog box to try again.
Passwords must be between 5 and 7 characters. The allowable values are the
alphanumeric characters 'a' through 'z' and '0' through '9'. The values are
case
insensitive
.
If the password has been forgotten, a new Network (page 105) will have to be
defined and the old network Deleted (page 76).
9.2 Delete
Network
A Network would need to be deleted if its password were forgotten. A new
Network would need to be defined in its place.
Note:
After a Network has been deleted, there is no way to restore it.
To delete a network, from the RadioLinx ControlScape FH Setup Application's
Main Menu,
select:
File
o
Exit
Open the Windows Explorer and locate the "Program Files" folder on the main
drive. In the "Program Files" folder will be the "ProSoft" folder and inside that will
be the "RadioLinx" folder. Open these folders. Locate and select the network
Summary of Contents for RadioLinx FH Series
Page 6: ......
