RLX-FHE, RLX-FHES, RLX-FHS
♦
RadioLinx FH
Reference
Frequency-Hopping Industrial Radio
Page 106 of 151
ProSoft Technology, Inc.
November 25, 2008
Hop interval (RLX-IFH radios):
For most applications, you do not need to
change this setting. Hop Interval sets the length of time that the radios stay
on a channel before hopping to the next channel. Changing this value to an
incorrect setting can render the network inoperable. For certain traffic
patterns, this value can be tailored so as to provide a small improvement to
throughput or latency.
Encryption Key (RLX-FH radios)
o
5 to 7 characters = 40 bit encryption
o
15 to 24 characters = 128 bit encryption
Encryption Level:
Choose the encryption type (128-bit AES or Disabled)
from the dropdown list.
Passphrase (RLX-IFH radios):
The passphrase is used to encrypt all radio
traffic. All radios in a network must be programmed with the same
passphrase, or they will not be able to communicate. populates this field with
a randomly generated sequence of characters. If you prefer, you can enter
your own passphrase here.
15.1.2 Graphical Layout Screen
This Graphical Layout screen appears after you create a new network (page 51)
configuration, or open an existing network (page 75) configuration. Use the
following menu commands to view or change the settings for networks and
radios.
File Menu
Close
Save
Exit
Port Setup Menu
Serial Port Configure (page 97)
Radio Menu
Add
Radio
Remove Radio (page 64)
Properties Menu
Device ID (page 118)
Device Networks (page 120)
Summary of Contents for RadioLinx FH Series
Page 6: ......
