RLX-FHE, RLX-FHES, RLX-FHS
♦
RadioLinx FH
Radio Networks
Frequency-Hopping Industrial Radio
Page 22 of 151
ProSoft Technology, Inc.
November 25, 2008
DNP Protocol
DNP is a protocol for communication between industrial devices, often used in
utilities such as power distribution.
The DNP radio network type configures the radios to support communications
between DNP devices over the radio network. The software configures each
radio with a table of the DNPs device IDs and the radios they are attached to.
This allows the radios to direct DNP packets through the network to the correct
destination.
Although the structure of the radio network consists of a Master radio and
connecting Repeaters and Remotes, the radios can all communicate with each
other, allowing peer-to-peer communication among the DNP devices.
3.2.3 DF1 Half Duplex Protocol
Note:
DF1 FULL DUPLEX (page 20) IS ANOTHER TYPE OF NETWORK.
A
DF1 Half Duplex Protocol
network is a multi-drop protocol for one master and
one or more slaves. With DF1 Half Duplex Protocol, you can have 2 to 255
nodes simultaneously connected on a single link. This link operates with all
nodes interfaced through half-duplex modems.
Summary of Contents for RadioLinx FH Series
Page 6: ......
