ProSoft Technology PLX3x Series, User Manual

Page: 28 / 215

Using ProSoft Configuration Builder PLX3x Series ♦ Multi-Protocol Gateways
User Manual
Page 28 of 215 ProSoft Technology, Inc.
January 25, 2018
3 Click T
EST
C
ONNECTION
to verify that the IP address allows access to the
module.
4 If the connection succeeds, click D
OWNLOAD
to transfer the Ethernet
configuration to the module.
If the Test Connection procedure fails, you will see an error message. To correct
the error, follow these steps.
1 Click OK to dismiss the error message.
2 In the Download dialog box, click B
ROWSE
D
EVICE
(
S
) to open ProSoft
Discovery Service .
3 Right-click the module and then choose S
ELECT FOR
PCB .
4 Close ProSoft Discovery Service .
5 Click D
OWNLOAD
to transfer the configuration to the module.