Page 8 of 14
09-13-568-Rev5
3
Referring to Figure 5, loosely
fi
t 2x
Baseplates to the M8 Spring Nuts in the
Crossbars.
Recheck the measurements between the
insides of the Baseplates from step 1 and
ensure center Baseplate channels align.
Tighten screws to 4 Nm with 6 mm Allen
Key provided or a suitable Torque Wrench.
5
Fit Recovery Tracks by positioning the cross-hairs on your Tracks into the cross slots in the Baseplates.
Fit Adjuster Straps through cam buckles, pull to tighten
fi
rmly and secure the Velcro sections.
M8 Washer
M8 Socket Head
Capscrew 25 mm
M8 Spring Washer
Fig. 5
4
Attach Straps by hooking the metal
webbing buckles from behind through the
side holes on the Baseplates.
Ensure that the buckles are sitting
fl
ush
against the Baseplate as pictured, that
the Velcro section of the Adjuster Strap is
facing forward and that the Velcro section
of the Fixed Strap is facing backward.
Repeat steps for other Baseplate.
