Page 10 of 14
09-13-568-Rev5
4
Attach Straps by hooking the metal
webbing buckles from behind through the
side holes on the Baseplates.
Ensure that the buckles are sitting
fl
ush
against the Baseplate as pictured, that
the Velcro section of the Adjuster Strap is
facing forward and that the Velcro section
of the Fixed Strap is facing backward.
Repeat steps for other Baseplate.
5
Fit Recovery Tracks by positioning the cross-hairs on your Tracks into the cross slots in the Baseplates.
Fit Adjuster Straps through cam buckles, pull to tighten
fi
rmly and secure the Velcro sections.
Installation directly onto P-Bar and other Square Crossbars
Check crossbar spread is between 492 mm to
892 mm. Position Baseplates on to separate
crossbars noting the narrow ends face
towards the front and rear of the vehicle.
Set the distance between the inside of the
Baseplates according to your Recovery Track
type:
TRED 800 = 235 mm
TRED 1100 / MAXTRAX MKII = 440 mm
1
440 mm
235 mm
