Page 5 of 14
09-13-568-Rev5
7
Loosely
fi
t Adjuster strap through the cam buckle in the Fixed Strap assembly prior to
fi
tting recovery
tracks. Insert recovery tracks through the loose Straps. Locate the cross-hairs on your recovery tracks
into the corresponding cross slots in the Baseplates. Tighten Straps
fi
rmly and secure the Velcro
sections.
2
Installation of Recovery Tracks Carrier plus Mounting Brackets on Prorack S-Wing and
International T-Slot Crossbars
Check crossbar spread is between 492 mm to
892 mm. Push rubber in
fi
ll down and slide 2x
M8 T-Nuts into each crossbar channel at an
equal distance from the ends of the crossbars.
The 6 mm Alley key can be used to assist T-Nut
installation into the channel.
Use the Mounting Bracket to ensure T-Nuts align
with holes in the base of Mounting Bracket.
Referring to Figure 3, secure the 2 x Mounting
Brackets to the M8 T-Nuts in the crossbars.
Tighten to 4 Nm with 6 mm Allen Key provided
or a suitable Torque Wrench.
1
Fig. 3
Slide 1 x M8 Slot Nut
into the top channel of
Mounting Bracket.
Repeat step for other
Mounting Bracket.
3
M8 Spring Washer
M8 Socket Head
Capscrew 16 mm
M8 Washer
M8 T-Nut
