V1.0
TOOL SHARPENER
8680944
Visit www.princessauto.com for more information
9
from coming into contact with the tool and from
getting caught by the workpiece. The cord should
always stay behind the tool.
5. Do not allow people, mobile equipment or vehicles to pass
over unprotected power cords.
5.1 Position power cords away from traffic areas.
5.2 Place cords in reinforced conduits.
5.3 Place planks on either side of the power cord to create
a protective trench.
6. Do not wrap cord around the tool as sharp edges may cut
insulation or cause cracks if wound too tight. Gently coil
cord and either hang on a hook or fasten with a device to
keep cord together during storage.
POWER TOOL PRECAUTIONS
1. Do not allow the tool to run without load for an extended
period of time, as this will shorten its life.
2. Do not cover the air vents. Proper cooling of the motor is
necessary to ensure normal life of the tool.
3. Avoid unintentional starting. Ensure the switch is off when
connecting to the power source.
4. Disconnect the power source before installing or servicing
the tool.
5. Never force the tool. Excessive pressure could break the
tool, resulting in damage to your workpiece or serious
personal injury. If your tool runs smoothly under no load,
but does not run smoothly under load, then excessive
pressure is being used.
6. Do not touch an operating motor. Motors can operate at
high temperatures and can cause a burn injury.
7. Only use accessories that are specifically designed for use
with the tool. Ensure the accessory is tightly installed.
8. Only use an accessory that exceeds the No Load Speed
rating (see Specifications).
